Volume 4, Number 4 (Autumn 2016)                   Iran J Health Sci 2016, 4(4): 41-55 | Back to browse issues page



DOI: 10.18869/acadpub.jhs.4.4.41

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Mirbagheri S A, Biglarijoo N, Ahmadi S, Razmara P, Doost A Y. Removing Fe, Zn and Mn from steel making plant wastewater using RO and NF membranes. Iran J Health Sci. 2016; 4 (4) :41-55
URL: http://jhs.mazums.ac.ir/article-1-454-en.html

PhD Candidate Khaje Nasir Toosi University of Technology, Tehran, Iran
Abstract:   (1019 Views)

Background and purpose: Excessive amount of heavy metals in industrial wastewater is a seriously crucial issue and requires efficient methods to be introduced and dealt with. Meanwhile, steel making plants as productive units in every country release large amounts of fluid into surface and underground sources. Typically, this wastewater contains heavy metals in minor amounts, while this amount could cause severe damages to the living organisms.

Materials and methods: In this study, removing iron, manganese, zinc and total dissolved solid in a typical wastewater resulted from steel making plant was considered using reverse osmosis (RO) and nanofiltration (NF) membranes. At first, different pH values and operating pressures were applied to the wastewater. Then, these parameters were evaluated for a wastewater only containing iron to compare the interaction of other elements in iron removal.

Results: The results indicated that RO and NF membranes could successfully treat industrial wastewater containing several heavy metals with high concentrations of Fe, Zn and Mn, especially at optimum pH and pressure. Moreover, the interaction of other heavy metals and components in the influent decreased the efficiency of RO but improved the NF efficiency to remove iron. To have a better image, a formula was proposed for each method to represent the influence of the parameters on removal rates. Finally, cost estimation for both procedures showed that RO was not economically-technically efficient in comparison with NF.

Conclusion: NF showed an acceptable performance with high water flow which made it more suitable for industries. At the end, the relative cost analysis showed that even if the initial price of NF is high, the energy consumption and total cost of RO will be higher.

Full-Text [PDF 970 kb]   (309 Downloads)    
Type of Study: Original Article | Subject: Biostatistics
Received: 2015/12/6 | Accepted: 2016/05/7 | Published: 2016/12/5

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author


© 2015 All Rights Reserved | Iranian Journal of Health Sciences

Designed & Developed by : Yektaweb